Press Brake Punches and Dies for all your Tooling needs.
Gooseneck punches are ideal for forming special shapes where a 90 degree punch would interfere or channel forming in two strokes. The width of face and the length of the return flange are shown. If longer return flanges are required, the punches can be cut back beyond the center line, however, the work capacity of the punch will be reduced. These are used with 90 degree female dies.
Click on image for detailed view.
Click on image for detailed view.
Gooseneck punches numbers 47, 49, 51, and 53 are cut back beyond the center line, allowing longer return flanges. The width of channel must be increased because of the taper on the inside of the gooseneck.
