Offset

Free Press Brake Die Tooling Sample

S&H additional
Limit one at 1 to 2 inch long. Substitution may be required.
Offset dies form two 90 degree bends in one stroke. Dimensions show amount of offset from inside to outside of metal thickness. Sizes shown are suitable for mild steel to 18 gauge. Often, metals and heavier gauges of mild steel can be formed depending on size of offset and press brake capacity available.
Custom
Custom
No.55
No.55
No.57
No.57
Custom
Custom
No.55A
No.55A
No.57A
No.57A

No.59
No.59
No.61
No.61
No.63
No.63
No.59A
No.59A
No.61A
No.61A
No.63A
No.63A

No.65
No.65
No.67
No.67
No.69
No.69
No.65A
No.65A
No.67A
No.67A
No.69A
No.69A

No.71
No.71
No.73
No.73
No.71A
No.71A
No.73A
No.73A

Die set No.105 & No.106 preform best for material thickness offsets.
Die set No.107 & No.108 is recommended for use on heavier gauge stock for an open angle offset.

no105no106
No.105 & No.106
No.107 & No.108
No.107 & No.108

Die set No.161 & No.162 can but made to suit your 135° offsets.
Die set No.222 & No.223 can give comparatively good results with air bending when press brake capacity is an issue.

No. 161 & No.162
No. 161 & No.162
No.222 & No.223
No.222 & No.223